top of page

P2, P3 and P6 LED Walls: How to Pick the Right One for Your Venue

Nov 6
4 min read

The difference between a P2 and P3 LED wall comes down to one number called pixel pitch, and it is the first spec worth understanding before you book an LED wall rental (https://www.reddamien.com/services/led-wall-rental) for your event. Once you know what that number means, it becomes much easier to read a quote and to picture how the screen will look from your guests' seats.


This guide explains pitch in plain words, shows how the size of your room points you to the right panel, and tells you why P3 is the LED wall we bring to most events, from our Quezon City base.


What pixel pitch means


An LED wall is made of thousands of tiny lights grouped into pixels. Pixel pitch is the distance from the center of one pixel to the center of the next one, and it is measured in millimeters. The number after the “P” is that distance. A P3 panel has about 3 millimeters between pixel centers, a P2 panel has about 2 millimeters, and a P6 panel has about 6 millimeters.


A smaller number means the pixels sit closer together. More pixels fit in the same space, so the picture looks finer and stays smooth even when people stand near the screen. A bigger number means the pixels are spread further apart. That screen still looks good, but your audience needs to be further back before the dots blend into one clean image.


Why viewing distance matters more than the spec sheet


If you walk right up to any LED wall, you will see the separate dots. Step back and, at some point, your eyes stop noticing them and you just see the picture. That point is what pitch is really about.


The LED industry uses a few rules of thumb to estimate it. One of the most common is the “10x rule”: multiply the pitch in millimeters by 10, and you get a rough distance in feet where the image looks fully smooth to someone with sharp eyesight. By that rule, a P2 wall looks smooth from about 20 feet, a P3 wall from about 30 feet, and a P6 wall from about 60 feet.


That rule is on the careful side. Other manufacturers use gentler formulas, and most guests watching a video or a slideshow will be happy with the picture closer than that. Treat the numbers as a starting point for planning your room, not as a hard line.

How your room size points to the right pitch


The easiest way to choose is to think about where your nearest and farthest guests will be.


In a small function room or a boardroom, people sit only a few meters from the screen and often read slides with small text. This is where a finer pitch like P2 makes the most sense, because the image needs to stay crisp up close.


In a typical hotel ballroom, events hall or covered court, the first row of tables is usually some distance from the stage, and most guests are further back than that. A P3 wall fits this kind of room very well. It is sharp enough for videos, photos, names and logos, and it gives a clean picture from the middle and back of the room.

For a very large hall or a crowd that stands far from the stage, a coarser pitch like P6 can work, since nobody is close enough to notice the wider spacing. Before you decide on any of these, it helps to measure from the stage to your nearest table and to your farthest one. Those two numbers tell us more than anything else.


Why P3 is our standard


We built our LED wall offer around P3 because it suits the rooms most of our clients book. It handles the content people actually play at events, such as entrance videos, photo slideshows and program titles, and it looks clean from where guests usually sit.


Our P3 walls come in two sizes, 8x11 ft and 8x13 ft (https://www.reddamien.com/post/led-wall-size-guide). The 8x13 ft wall is the bigger of the two. If you send us your stage measurements, we can tell you which one fits your venue better.


If your event needs something different, we can also arrange P2 and P6 panels on request. Tell us about your room and your program, and we will tell you honestly whether P3 is enough or whether another pitch suits you better.


Pitch, budget and what to send us


Finer pitch panels hold more LEDs in every square foot, so they usually cost more to rent than coarser ones. That is one more reason not to pay for a finer pitch than your room needs.


We do not publish rates, because the right setup depends on your date, your venue and how the wall will be used. The quickest way to get a clear answer is to send us your event date, your venue, your expected guest count and where you want the wall to stand. With that, we can recommend a pitch and a size and send you a quote.


If this is your first time renting a screen, our LED wall rental guide for first-timers (https://www.reddamien.com/post/led-wall-rental-guide-for-first-timers) walks you through the rest of the planning. When you are ready, you can also send your details through our inquiry page (https://www.reddamien.com/inquiry).


Talk to us


Call or text Nadith at 0917 192 7428 or Kat at 0917 158 8428, or visit https://www.reddamien.com.

Comments


Colored Theatre Lights

BLOGS

Insights & Inspiration

Discover tips, trends, and behind-the-scenes stories from the world of events, lighting, and sound.

Stay Updated!

Sign up for our newsletter to receive the latest tips and updates on events, lighting, and sound.

Need Professional Lights & Sound for Your Event?

Check out our services and make your event unforgettable!

Interested in our services?

bottom of page